Spreader type
Single Lift
Twin Lift
long-Twin
Yard Crane Spreaders features
Optimized
Visibility
Our monobeam constructions allows for a slim midframe that gives your operators optimal sight lines on the container and its surroundings, while your technicians have easy access during maintenance.
Collision
Protection
A mechanical blocking device is mounted inside the midframe to absorb shocks to the end beam that result from a collision with a container. This improves the spreader life span and reduces the need for costly maintenance.
Fast & Smooth Telescoping
We achieve great telecope speeds because we use a steel reinforced rubber belt to move the monobeam. This construction is optimized for high speed, high durability, low sound emissions and little maintenance. It doesn’t even need to be lubricated!
Electrical Twistlock Drive
With the use of multiple sensors and an electric motor, this electrical powered system makes sure the twistlocks can be locked or unlocked.
Smooth Start/Stop Telescoping Sytem
The frequency converter smoothly starts, stops and synchronizes the telescoping beam.
Automatic Greasing System
Our automatic greasing system can service up to 50 greasing points on your spreader. The system guarantees consistent spreader performance and reduces wear and tear. You see this returned as less downtime and lower maintenance cost.
Patented Twistlock Design
The twistlock is one of the most critical components of your spreader. Our patented double collar twistlock design provides the longest possible life span for your twistlocks and allows for easy removal of the twistlock nut for non-destructive testing.
Landing
Pin
Our spreaders are equipped with a landing pin on the side of each twistlock of the spreader. All landing pins have to be individually raised to enable the twistlocks to lock/unlock.
Yard Crane Spreaders Options
Fixed
Flippers
Equip your spreader with fixed flippers to increase productivity. Placing your spreader on top of a container that is positioned close to other boxes
Actuated
Flippers
Equip your spreader with Actuated flippers to increase productivity. Placing your spreader on top of a container that is positioned close to other boxes
Cameras At the
Twistlocks
Clear vision is essential for maintaining optimal levels of efficiency and safety when you lift cargo. Your preferred camera type can be mounted on the adjustable brackets.
Stinis
Insight
Improve the performance of your spreader fleet with our remote monitoring system. Stinis Insights reports the health status and performance of your spreader fleet and gives insights into spreader status and fault messages for instant trouble shooting.
Shock
Absorption
Our shock absorption system reduces noise at your terminal. This enables you to operate 24/7 even if your terminal is in the vicinity of residential areas. The decreased shocks also help increase the lifespan of the spreader.
Ladders To
Headblock
The limited width of the midframe allows you to install anti-slip ladders on the side of the spreader to climb up the headblock.
Height indication
system
The Height Indication System consists of a proximity switch (reach 0.8 – 6 meter) with 1 or 2 set-points, to measure the distance between the underside of the spreader and the top of the container. This system allows you to reduce the landing speed when approaching the container.
Hydraulic
Loadsense System
The spreader can be equipped with an energy saving hydraulic system. The setup uses a pump with a variable output which allows the pressure, flow and power to be controlled. When no functions are being used on the spreader, and thus no oil is needed, the pump will reduce its variable output to the absolute minimum.
LED Lights At
The Twistlocks
Time pressure leaves no room for error, let alone accidents. To improve operator performance and for safety purposes, LED lights can be installed at the twistlocks to improve visibility of the corner castings of the container.
Safety
Striping
It’s possible to fully customize our lifting equipment. Striping is often used as a safety option that shows the moving elements.
Easy To Use
Touch Screen
Our spreaders can be equipped with a touch screen that displays valuable information such as the spreader status and error logs. The screen also allows for manual spreader control to support your crews during maintenance.
LED Lights
Dimmable
Our spreaders can be equipped with dimmable LED lights. Several options are available to enhance safety.
SPREADER TYPE
Single lift
Twin lift
Long-twin
Yard Crane Spreaders Features
Our monobeam constructions allows for a slim midframe that gives your operators optimal sight lines on the container and its surroundings, while your technicians have easy access during maintenance.
Optimized Visibility
A mechanical blocking device is mounted inside the midframe to absorb shocks to the end beam that result from a collision with a container. This improves the spreader life span and reduces the need for costly maintenance.
Collision Protection
We achieve great telescope speeds because we use a steel reinforced rubber belt to move the monobeam. This construction is optimized for high speed, high durability, low sound emissions and little maintenance. It doesn’t even need to be lubricated!
Fast & Smooth Telescoping
With the use of multiple sensors and an electric motor, this electrical powered system makes sure the twistlocks can be locked or unlocked.
ELECTRICAL TWISTLOCK DRIVE
The frequency converter smoothly starts, stops and synchronizes the telescopic beam.
Smooth Start/Stop Telescoping Sytem
Our automatic greasing system can service up to 50 greasing points on your spreader. The system guarantees consistent spreader performance and reduces wear and tear. You see this returned as less downtime and lower maintenance cost.
Automatic greasing system
The twistlock is one of the most critical components of your spreader. Our patented double collar twistlock design provides the longest possible life span for your twistlocks and allows for easy removal of the twistlock nut for non-destructive testing.
Patented Twistlock Design
Our spreaders are equipped with a landing pin on the side of each twistlock of the spreader. All landing pins have to be individually raised to enable the twistlocks to lock/unlock.
Landing Pin
THE YARD
Yard Crane Spreaders Options
Equip your spreader with fixed flippers to increase productivity. The fixed flippers help guide your spreader, and make it easy to place the spreader on top of a container that is positioned close to other objects.
Fixed Flippers
Equip your spreader with Actuated flippers to increase productivity. The actuated flippers help guide the spreader in the longitudinal direction.
Actuated Flippers
Clear vision is essential for maintaining optimal levels of efficiency and safety when you lift cargo. Your preferred camera type can be mounted on the adjustable brackets.
Cameras At The Twistlocks
Improve the performance of your spreader fleet with our remote monitoring system. Stinis Insights reports the health status and performance of your spreader fleet and gives insights into spreader status and fault messages for instant trouble shooting.
Stinis Insight
Our shock absorption system reduces noise at your terminal. This enables you to operate 24/7 even if your terminal is in the vicinity of residential areas. The decreased shocks also help increase the lifespan of the spreader.
Shock Absorption
The limited width of the midframe allows you to install anti-slip ladders on the side of the spreader to climb up the headblock.
Ladders To Headblock
The Height Indication System consists of a proximity switch (reach 0.8 – 6 meter) with 1 or 2 set-points, to measure the distance between the underside of the spreader and the top of the container. This system allows you to reduce the landing speed when approaching the container.
Height Indication System
The spreader can be equipped with an energy saving hydraulic system. The setup uses a pump with a variable output which allows the pressure, flow and power to be controlled. When no functions are being used on the spreader, and thus no oil is needed, the pump will reduce its output to the minimum.
Hydraulic Loadsense System
Time pressure leaves no room for error, let alone accidents. To improve operator performance and for safety purposes, LED lights can be installed at the twistlocks to improve visibility of the corner castings of the container.
LED Lights At The Twistlocks
It’s possible to fully customize our lifting equipment. Striping is often used as a safety option that shows the moving elements.
Safety Striping
Our spreaders can be equipped with a touch screen that displays valuable information such as the spreader status and error logs. The screen also allows for manual spreader control to support your crews during maintenance.
Easy To Use Touch Screen
Our spreaders can be equipped with dimmable LED lights. Several options are available to enhance safety.
LED Lights Dimmable
Spreader type
Single lift
Twin Lift
Long-twin
Yard Crane Spreaders features
Our monobeam constructions allows for a slim midframe that gives your operators optimal sight lines on the container and its surroundings, while your technicians have easy access during maintenance.
Optimized Visibility
Optimized Visibility
A mechanical blocking device is mounted inside the midframe to absorb shocks to the end beam that result from a collision with a container. This improves the spreader life span and reduces the need for costly maintenance.
Collision Protection
Collision Protection
We achieve great telecope speeds because we use a steel reinforced rubber belt to move the monobeam. This construction is optimized for high speed, high durability, low sound emissions and little maintenance. It doesn’t even need to be lubricated!
Fast & Smooth Telescoping
Fast & Smooth Telescoping
With the use of multiple sensors and an electric motor, this electrical powered system makes sure the twistlocks can be locked or unlocked.
Electrical Twistlock Drive
Electrical Twistlock Drive
The frequency converter smoothly starts, stops and synchronizes the telescoping beam.
Smooth Start/Stop Telescoping Sytem
Smooth Start/Stop Telescoping Sytem
Our automatic greasing system can service up to 50 greasing points on your spreader. The system guarantees consistent spreader performance and reduces wear and tear. You see this returned as less downtime and lower maintenance cost.
Automatic greasing system
Automatic Greasing System
The twistlock is one of the most critical components of your spreader. Our patented double collar twistlock design provides the longest possible life span for your twistlocks and allows for easy removal of the twistlock nut for non-destructive testing.
Patented Twistlock Design
Durable Twistlocks
Our spreaders are equipped with a landing pin on the side of each twistlock of the spreader. All landing pins have to be individually raised to enable the twistlocks to lock/unlock.
Landing Pin
Landing Pin
Yard Crane Spreaders Options
Equip your spreader with fixed flippers to increase productivity. Placing your spreader on top of a container that is positioned close to other boxes
Fixed Flippers
Fixed Flippers
Equip your spreader with Actuated flippers to increase productivity. Placing your spreader on top of a container that is positioned close to other boxes
Actuated Flippers
Actuated Flippers
Clear vision is essential for maintaining optimal levels of efficiency and safety when you lift cargo. Your preferred camera type can be mounted on the adjustable brackets.
Cameras At the Twistlocks
Cameras At The Twistlocks
Improve the performance of your spreader fleet with our remote monitoring system. Stinis Insights reports the health status and performance of your spreader fleet and gives insights into spreader status and fault messages for instant trouble shooting.
Stinis Insight
Stinis Insight
Our shock absorption system reduces noise at your terminal. This enables you to operate 24/7 even if your terminal is in the vicinity of residential areas. The decreased shocks also help increase the lifespan of the spreader.
Shock Absorption
Shock Absorption
The limited width of the midframe allows you to install anti-slip ladders on the side of the spreader to climb up the headblock.
Ladders To Headblock
Ladders To Headblock
The Height Indication System consists of a proximity switch (reach 0.8 – 6 meter) with 1 or 2 set-points, to measure the distance between the underside of the spreader and the top of the container. This system allows you to reduce the landing speed when approaching the container.
Height indication system
Height Indication System
The spreader can be equipped with an energy saving hydraulic system. The setup uses a pump with a variable output which allows the pressure, flow and power to be controlled. When no functions are being used on the spreader, and thus no oil is needed, the pump will reduce its variable output to the absolute minimum.
Hydraulic Loadsense System
Hydraulic Loadsense System
Time pressure leaves no room for error, let alone accidents. To improve operator performance and for safety purposes, LED lights can be installed at the twistlocks to improve visibility of the corner castings of the container.
LED Lights At The Twistlocks
LED Lights At The Twistlocks
It’s possible to fully customize our lifting equipment. Striping is often used as a safety option that shows the moving elements.
Safety Striping
Safety Striping
Our spreaders can be equipped with a touch screen that displays valuable information such as the spreader status and error logs. The screen also allows for manual spreader control to support your crews during maintenance.
Easy To Use Touch Screen
Easy To Use Touchscreen
Our spreaders can be equipped with dimmable LED lights. Several options are available to enhance safety.
LED Lights Dimmable
LED Lights Dimmable